VideoJet X10

Installation en 23

 

 

Relay Outputs

The VideoJet X10 has four relay outputs for switching external units such as lamps or alarm sirens. You can operate these relay outputs manually while there is an active connection to the VideoJet X10. The outputs can also be configured to automatically activate sirens or other alarm units in response to an alarm signal. The relay outputs are also located on the orange terminal block (see Section 8.8 Terminal Block, page 109).

!

CAUTION!

A maximum load of 30 V and 2 A (SELV) may be applied to the relay contacts.

 

X Connect the lines to the appropriate terminals on the orange terminal block (R1 to R4) and check that the connection is secure.

Remote Indication of the Connection Status

When the VideoJet X10 is connected to a video, the Connect LED on the front panel of the unit flashes. The LED also provides information on the operational state of the unit and signals a unit defect (see Section 8.4 LEDs, page 107).

You can connect an additional two-color LED to the VideoJet X10 as a remote indicator. This provides the same information as the integrated Connect LED. A remote indicator can be useful if the VideoJet X10 is installed at a location that is difficult to access or see, for example in a cable duct or on top of a mast. Just like the integrated LED, the remote indicator LED should also light up red and green in order to avoid confusion.

Please comply with the following specifications and the connection diagram:

Voltage between RM1 and RM2

3.3 V DC max.

 

 

 

 

 

 

 

 

 

Current between RM1 and RM2

25 mA max.

 

 

 

 

 

 

 

 

 

Source resistance

140 Ohm typ.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1.Connect the LED lines to the appropriate terminals on the orange terminal block (RM1 and RM2) and check that the connection is secure.

2.Check that the signals on the Connect LED on the VideoJet X10 and the remote indicator LED correspond.

Bosch Security Systems

Installation and Operating Manual

DOC V4.0 2009.06

Page 23
Image 23
Bosch Appliances X10 manual Relay Outputs, Remote Indication of the Connection Status

X10 specifications

The Bosch Appliances X10 represents a significant advancement in home appliance technology, combining sleek design with cutting-edge functionality. This innovative product line is designed to enhance the efficiency and convenience of daily chores, allowing users to experience a new level of comfort in their homes.

One of the standout features of the Bosch X10 series is its energy efficiency. The appliances are engineered to consume minimal energy while providing optimal performance, which not only helps in reducing utility bills but also supports eco-friendly living. Each appliance in the X10 range is certified with high energy ratings, making them an excellent choice for environmentally conscious consumers.

The X10 series incorporates advanced technology to streamline kitchen and laundry tasks. The intuitive user interface makes it easy for users to navigate through various settings, ensuring that they can customize functions according to their specific needs. Touch controls and digital displays allow for effortless operation, enhancing the user experience.

One of the hallmark technologies integrated into Bosch Appliances X10 is the SmartHome compatibility. This feature enables users to connect their appliances to their smartphones via Wi-Fi, allowing remote monitoring and control. Whether it’s adjusting the oven temperature or starting a wash cycle from afar, this connectivity offers unparalleled convenience for today's busy lifestyles.

Safety is a top priority in the Bosch X10 series. Each appliance is designed with multiple safety features, including child locks, auto-off functions, and sensor-based alerts that notify users of any potential issues. These enhancements provide peace of mind, especially for families with young children.

Another key characteristic of the Bosch Appliances X10 is their quiet operation. Utilizing innovative sound-dampening technologies, these appliances are designed to function with minimal noise, allowing users to enjoy a peaceful home environment. This is particularly beneficial in open-concept living spaces where noise from appliances can be disruptive.

The aesthetic appeal of the Bosch X10 line is noteworthy as well. With a modern, minimalist design available in a variety of finishes, these appliances complement a wide range of kitchen and laundry room decors.

In summary, the Bosch Appliances X10 series exemplifies the perfect combination of energy efficiency, advanced technology, safety features, and aesthetic appeal. Homeowners looking to invest in reliable and innovative appliances will find the X10 range fits perfectly into their vision of a modern household, making everyday tasks easier and more enjoyable.