Bosch Appliances X10 Connections on the Rear Panel, ETH 1 LED, ETH 2 LED, Power On LED, Sfp Led

VideoJet X10Product Description en 17

3.5 Connections on the Rear Panel

7ETH 1 RJ45 socket

for connecting to an Ethernet LAN (local network), 10/100 MBit Base-T

8ETH 1 LED

lights up yellow when the unit is connected to the network via ETH 1

9ETH 2 RJ45 socket

for a redundant connection to the network or to an iSCSI system

10ETH 2 LED

lights up yellow when the unit is connected to the network via ETH 2

11Terminal block

for alarm inputs, relay outputs, serial interface and power supply

12Power On LED

lights up green when ready for operation

13Factory reset button

to restore factory default settings

14Compact Flash slot

for a CF card type I or type II

15SFP LED

lights up yellow when the unit is connected via SFP

16SFP slot

for mini-GBIC module

NOTICE!

i For more information about the LEDs, see Section 8.4 LEDs, page 107. For terminal block assignment, see Section 8.8 Terminal Block, page 109.

Bosch Security Systems Installation and Operating Manual DOC V4.0 2009.06