Bosch Appliances X10 Hardware Connections Between Video Servers, Connecting on Alarm, page

98 en OperationVideoJet X10

6.8	Hardware Connections Between Video Servers
	A VideoJet X10 with a camera connected to it can be used as a sender and a compatible
	MPEG-4 hardware decoder (such as the VIP XD) with a connected monitor as a receiver using
	an Ethernet network connection. In this way it is possible to cover long distances without the
	need for major installation or cabling work.
i	NOTICE!
	The sender and receiver must be located in the same subnet to establish a hardware
	connection.
	Installation
	Compatible video servers are designed to connect to one another automatically, provided
	they are correctly configured. They only need to be part of a closed network. Proceed as
	follows to install the units:
	1.	Connect the units to the closed network using Ethernet cables.
	2. Connect them to the power supply.
	NOTICE!
i	Make sure that the units are configured for the network environment and that the correct IP
	address for the remote location to be contacted in the event of an alarm is set on the Alarm
	Connections configuration page (see Section 5.27 Advanced Mode: Alarm Connections,
	page 59).
	Connecting
	There are three options for establishing a connection between a sender and a compatible
	receiver in a closed network:
	–	an alarm,
	– a terminal program, or
	–	Internet Explorer.
i	NOTICE!
	Connecting with a Web browser is described in the manual of the relevant unit that is to be
	used as the receiver, for example VIP XD.

Connecting on Alarm

With the appropriate configuration, a connection between a sender and a receiver is made automatically when an alarm is triggered (see Section 5.27 Advanced Mode: Alarm Connections, page 59). After a short time the live video image from the sender appears on the connected monitor.

This option can also be used to connect a sender and a compatible receiver using a switch connected to the alarm input. You do not need a computer to make the connection in this case.

DOC V4.0 2009.06 Installation and Operating Manual Bosch Security Systems