Bosch Appliances X10 Saving Snapshots, Recording Video Sequences, Running Recording Program, page

94 en OperationVideoJet X10

6.3 Saving Snapshots

You can save individual images from the video sequence currently shown on the LIVEPAGE in JPEG format on your computer's hard drive. The icon for recording single images is only visible if the unit is configured to enable this process (see Section Allow snapshots, page 44).

XClick the icon. The image is saved at a resolution of 704 × 576 pixels (4CIF). The storage location depends on the configuration of the VideoJet X10 (see Section Path for JPEG and MPEG files, page 44).

6.4 Recording Video Sequences

You can save sections of the video sequence currently shown on the LIVEPAGE on your computer's hard drive. The icon for recording video sequences is only visible if the unit is configured to enable this process (see Section Allow local recording, page 44).

1.Click the icon to start recording. The storage location depends on the configuration of the VideoJet X10 (see Section Path for JPEG and MPEG files, page 44). A red dot in the icon indicates that recording is in progress.

2.Click the icon again to stop recording.

i	NOTICE!
	You can play back saved video sequences using the Player from Bosch Security Systems,
	which can be installed from the product CD supplied (see Section 3.1 Scope of Delivery,
	page 11).

	Image Resolution
	Sequences are saved at the resolution that has been preset in the configuration for the
	encoder (see Section 5.19 Advanced Mode: Encoder Profile, page 47).
6.5	Running Recording Program
	The hard drive icon below the camera images on the LIVEPAGE changes during an automatic
	recording.

A moving graphic will appear to indicate a running recording. If no recording is taking place, a static icon is displayed.

DOC V4.0 2009.06 Installation and Operating Manual Bosch Security Systems