Bosch Appliances X10 VCA configuration, Alarm status, Analysis type, Motion detector MOTION+ only

64 en Configuration Using a Web Browser VideoJet X10

3.Click the Save... button to save the profile settings to another file. A new window is opened, in which you can specify where you want to save the file and what name you want to save it under.

4.Click the Load... button to load a saved profile. A new window opens in which you can select the profile file and specify where to save the file.

VCA configuration

Select one of the profiles here to activate it or edit it.

You can rename the profile.

1.To rename the file, click the icon to the right of the list field and enter the new profile name in the field.

2.Click the icon again. The new profile name is saved.

	Alarm status
	The alarm status is displayed here for information purposes. This means you can check the
	effects of your settings immediately.
	Analysis type
	Select the required analysis algorithm. By default, only MOTION+ is available – this offers a
	motion detector and essential recognition of tampering.
	NOTICE!
i	Additional analysis algorithms with comprehensive functions such as IVMD and IVA are
	available from Bosch Security Systems.
	If you select one of these algorithms, you can set the corresponding parameters here directly.
	You can find information on this in the relevant documents on the product CD supplied.
	Metadata is always created for a video content analysis, unless this was explicitly excluded.
	Depending on the analysis type selected and the relevant configuration, additional
	information overlays the video image in the preview window next to the parameter settings.
	With the MOTION+ analysis type, for example, the sensor fields in which motion is recorded
	will be marked with rectangles.
i	NOTICE!
	On the LIVEPAGE Functions page, you can also enable additional information overlays for the
	LIVEPAGE (see Section 5.15 Advanced Mode: LIVEPAGE Functions, page 43).
	Motion detector (MOTION+ only)
	For the detector to function, the following conditions must be met:
	– Analysis must be activated.
	– At least one sensor field must be activated.
	– The individual parameters must be configured to suit the operating environment and the
	desired responses.
	– The sensitivity must be set to a value greater than zero.
	CAUTION!
	Reflections of light (off glass surfaces, etc.), switching lights on or off or changes in the light

!level caused by cloud movement on a sunny day can trigger unintended responses from the motion detector and generate false alarms. Run a series of tests at different times of the day

and night to ensure that the video sensor is operating as intended.

For indoor surveillance, ensure constant lighting of the areas during the day and at night.

DOC V4.0 2009.06 Installation and Operating Manual Bosch Security Systems