Bosch Appliances X10 Basic Mode Date/Time, Confirm password, Unit date/Unit time/Unit time zone

32 en Configuration Using a Web Browser VideoJet X10

The highest authorization level is service. After entering the correct password, you can access all the functions of the VideoJet X10 and change all configuration settings.

With the user authorization level, you can operate the unit and also control cameras, for example, but you cannot change the configuration.

The lowest authorization level is live. It can only be used to view the live video image and switch between the different live image displays.

You can define and change a password for each authorization level if you are logged in as service or if the unit is not password protected.

Enter the password for the appropriate authorization level here.

NOTICE!

Proper password protection is only guaranteed when all higher authorization levels are also

i protected with a password. If a live password is assigned, for example, a service and a user password must also be set. When assigning passwords, you should therefore always start from the highest authorization level, service, and use different passwords.

Confirm password

In each case, enter the new password a second time to eliminate typing mistakes.

NOTICE!

i A new password is only saved when you click the Set button. You should therefore click the Set button immediately after entering and confirming a password.

5.4 Basic Mode: Date/Time

Unit date/Unit time/Unit time zone

If there are multiple devices operating in your system or network, it is important to synchronize their internal clocks. For example, it is only possible to identify and correctly evaluate simultaneous recordings when all units are operating on the same time. If necessary, you can synchronize the unit with your computer's system settings.

XClick the Sync to PC button to copy your computer's system time to the VideoJet X10.

Time server IP address

The VideoJet X10 can receive the time signal from a time server using various time server protocols, and then use it to set the internal clock. The unit polls the time signal automatically once every minute.

XEnter the IP address of a time server here.

DOC V4.0 2009.06 Installation and Operating Manual Bosch Security Systems