Bosch Appliances X10 manual Configuration, Upload, Download, SSL certificate, 192.168.0.10/reset

VideoJet X10 Configuration Using a Web Browser en 85

3.Next, click Upload to begin transferring the file to the unit. The progress bar allows you to monitor the transfer.

The new firmware is unpacked and the Flash EPROM is reprogrammed. The time remaining is shown by the message going to reset Reconnecting in ... seconds. The unit reboots automatically once the upload has successfully completed.

If the Connect LED lights up red, the upload has failed and must be repeated. To perform the upload you must now switch to a special page:

1.In the address bar of your browser, enter /main.htm after the IP address of the VideoJet X10 (for example 192.168.0.10/main.htm).

2.Repeat the upload.

Configuration

You can save configuration data for the VideoJet X10 on a computer and then load saved configuration data from a computer to the unit.

Upload

1.Enter the full path of the file to upload or click Browse to select the required file.

2.Make certain that the file to be loaded comes from the same unit type as the unit you want to configure.

3.Next, click Upload to begin transferring the file to the unit. The progress bar allows you to monitor the transfer.

Once the upload is complete, the new configuration is activated. The time remaining is shown by the message going to reset Reconnecting in ... seconds. The unit reboots automatically once the upload has successfully completed.

Download

1.Click the Download button. A dialog box opens.

2.Follow the on-screen instructions to save the current settings.

SSL certificate

To be able to work with an SSL encrypted data connection, both ends of a connection must hold the relevant certificates. You can upload the SSL certificate, comprising one or multiple files, onto the VideoJet X10.

If you wish to upload multiple files onto the VideoJet X10, you must select them consecutively.

i	NOTICE!
	The certificate must be created in the format *.pem so that it can be accepted by the unit.

1.Enter the full path of the file to upload or click Browse to select the required file.

2.Next, click Upload to begin transferring the file to the unit.

3.Once all files have been successfully uploaded, the unit must be rebooted. In the address bar of your browser, enter /reset after the IP address of the VideoJet X10 (for example

192.168.0.10/reset).

The new SSL certificate is valid.

Maintenance log

You can download an internal maintenance log from the unit to send it to Customer Service for support purposes. Click Download and select a storage location for the file.

Bosch Security Systems Installation and Operating Manual DOC V4.0 2009.06