Bosch Appliances X10 manual Basic Mode Network, Time server type, Dhcp, IP address, Subnet mask

Models: X10

1 124
Download 124 pages 61 Kb
Page 33
Image 33
Time server type

VideoJet X10

Configuration Using a Web Browser en 33

 

 

Time server type

Select the protocol that is supported by the selected time server. Preferably, you should select the SNTP server as the protocol. This supports a high level of accuracy and is required for special applications and subsequent function extensions.

Select Time server for a time server that works with the protocol RFC 868.

5.5

Basic Mode: Network

The settings on this page are used to integrate the VideoJet X10 into an existing network. Some changes only take effect after the unit is rebooted. In this case, the Set button changes to Set and Reboot.

1.Make the desired changes.

2.Click the Set and Reboot button. The VideoJet X10 is rebooted and the changed settings are activated.

CAUTION!

! If you change the IP address, subnet mask or gateway address, the VideoJet X10 is only available under the new addresses after the reboot.

DHCP

If a DHCP server is employed in the network for the dynamic assignment of IP addresses, you can activate acceptance of IP addresses automatically assigned to the VideoJet X10.

Certain applications (VIDOS, Bosch Video Management System, Archive Player, Configuration Manager) use the IP address for the unique assignment of the unit. If you use these applications, the DHCP server must support the fixed assignment between IP address and MAC address, and must be appropriately set up so that, once an IP address is assigned, it is retained each time the system is rebooted.

IP address

Enter the desired IP address for the VideoJet X10 in this field. The IP address must be valid for the network.

Subnet mask

Enter the appropriate subnet mask for the selected IP address here.

Gateway address

If you want the unit to establish a connection to a remote location in a different subnet, enter the IP address of the gateway here. Otherwise leave the box blank (0.0.0.0).

Bosch Security Systems

Installation and Operating Manual

DOC V4.0 2009.06

Page 33
Image 33
Bosch Appliances X10 manual Basic Mode Network, Time server type, Dhcp, IP address, Subnet mask, Gateway address