Bosch Appliances X10 8.4LEDs, Power On LED, Sfp Led, ETH 1 LED, ETH 2 LED, Connect LED, Hdd Led

VideoJet X10 Appendix en 107

8.4LEDs

The VideoJet X10 network video server has a number of LEDs on its front and rear panels that show the operating status and can give indications of possible malfunctions:

Power On LED
Does not light up:	VideoJet X10 is switched off.
Lights up green:	VideoJet X10 is switched on.
SFP LED
Does not light up:	No connection.
Lights up yellow:	Connection established.
Flashes yellow:	Data being transmitted.
ETH 1 LED
Does not light up:	No network connection.
Lights up yellow:	Network connection established.
Flashes yellow:	Data being transmitted over the network.
ETH 2 LED
Does not light up:	No network connection.
Lights up yellow:	Network connection established.
Flashes yellow:	Data being transmitted over the network.
Connect LED
Lights up red:	Startup in progress.
Lights up green:	Startup complete, VideoJet X10 is operational.
Flashes green:	Video connection established.
Flashes red:	VideoJet X10 is faulty, for example following failed
	firmware upload.
HDD LED
Does not light up:	No hard drive fitted.
Lights up orange:	Hard drive fitted.
Flashes orange:	Hard drive activity.

Bosch Security Systems Installation and Operating Manual DOC V4.0 2009.06