Bosch Appliances X10 manual 5.10, Advanced Mode Identification, Device ID, Device name, Camera

VideoJet X10Configuration Using a Web Browser en 37

5.10 Advanced Mode: Identification

Device ID

Each VideoJet X10 should be assigned a unique identifier that you can enter here as an additional means of identification.

Device name

You can give the VideoJet X10 a name to make it easier to identify. The name makes the task of administering multiple units in larger video monitoring systems easier, for example using the VIDOS or Bosch Video Management System programs.

The device name is used for the remote identification of a unit, in the event of an alarm for example. For this reason, enter a name that makes it as easy as possible to quickly identify the location.

CAUTION!

!Do not use any special characters, for example &, in the name.

Special characters are not supported by the system's internal recording management and may therefore result in the Player or Archive Player being unable to play back the recording.

Camera 1

The camera name makes it easier to identify the remote camera location, in the event of an alarm for example. It will be displayed in the video screen if configured to do so (see Section Camera name stamping, page 40). The camera name makes the task of administering cameras in larger video monitoring systems easier, for example using the VIDOS or Bosch Video Management System programs.

Enter a unique, unambiguous name for the camera in this field. You can use both lines for this.

CAUTION!

!Do not use any special characters, for example &, in the name.

Special characters are not supported by the system's internal recording management and may therefore result in the Player or Archive Player being unable to play back the recording.

You can use the second line for entering additional characters; these can be selected from a table.

1.Click the icon next to the second line. A new window with the character map is opened.

2.Click the required character. The character is inserted into the Result field.

3.In the character map, click the << and >> icons to move between the different pages of the table, or select a page from the list field.

4.Click the < icon to the right of the Result field to delete the last character, or click the X icon to delete all characters.

Bosch Security Systems Installation and Operating Manual DOC V4.0 2009.06