Force10 Networks S2410s manual General System Management and Information Commands

Chapter 5	System Management
	Commands

The commands in this chapter either manage the switch in general, configure management interfaces, or show current management settings. For every configuration command, there is a show command that displays the configuration setting.

This chapter contains the following major sections:

•General System Management and Information Commands

•Telnet Commands on page 87

•Serial Commands on page 91

•SNMP Management Commands on page 94

Note: For information on system configuration and utility commands (such as the copy command), see System Configuration Commands on page 105.

For information on configuring and accessing the SFTOS Web User Interface (Web UI), see Using the Web User Interface on page 51.

General System Management and Information Commands

This section describes the following commands:

•dir on page 56

•hostname on page 57

•interface managementethernet on page 58

•ip address (management) on page 58

•mac-address on page 59

•mac-type on page 59

•management route default on page 60

•mtu on page 61

•network mac-address on page 62

•network mac-type on page 62

•network parms on page 62

SFTOS Command Reference for the S2410, Version 2.4.1.0 55