show interface ethernet

Table 8 Fields in Output of show interface ethernet unit/slot/port Command (continued)

Field

Description

 

 

Local Traffic Frames

The total number of frames dropped in the forwarding process

 

because the destination address was located off of this port.

 

 

802.3x Pause Frames Received

A count of MAC Control frames received on this interface with

 

an opcode indicating the PAUSE operation. This counter does

 

not increment when the interface is operating in half-duplex

 

mode.

Unacceptable Frame Type

The number of frames discarded from this port due to being an

 

unacceptable frame type.

VLAN Membership Mismatch

The number of frames discarded on this port due to ingress

 

filtering.

VLAN Viable Discards

The number of frames discarded on this port when a lookup on

 

a particular VLAN occurs while that entry in the VLAN table is

 

being modified, or if the VLAN has not been configured.

 

 

Multicast Tree Viable Discards

The number of frames discarded when a lookup in the

 

multicast tree for a VLAN occurs while that tree is being

 

modified.

 

 

Reserved Address Discards

The number of frames discarded that are destined to an IEEE

 

802.1 reserved address and are not supported by the system.

 

 

Broadcast Storm Recovery

The number of frames discarded that are destined for

 

FF:FF:FF:FF:FF:FF when Broadcast Storm Recovery is

 

enabled

CFI Discards

The number of frames discarded that have CFI bit set and the

 

addresses in RIF are in non-canonical format.

Upstream Threshold

The number of frames discarded due to lack of cell descriptors

 

available for that packet's priority level.

Packets Transmitted Octets

 

 

 

Total Bytes

The total number of octets of data (including those in bad

 

packets) received on the network (excluding framing bits but

 

including FCS octets). This object can be used as a

 

reasonable estimate of ethernet utilization. If greater precision

 

is desired, the etherStatsPkts and etherStatsOctets objects

 

should be sampled before and after a common interval.

Packets Transmitted 64 Octets

The total number of packets (including bad packets) received

 

that were 64 octets in length (excluding framing bits but

 

including FCS octets)

 

 

Packets Transmitted 65-127 Octets

The total number of packets (including bad packets) received

 

that were between 65 and 127 octets in length inclusive

 

(excluding framing bits but including FCS octets).

 

 

Packets Transmitted 128-255 Octets

The total number of packets (including bad packets) received

 

that were between 128 and 255 octets in length inclusive

 

(excluding framing bits but including FCS octets)

Packets Transmitted 256-511 Octets

The total number of packets (including bad packets) received

 

that were between 256 and 511 octets in length inclusive

 

(excluding framing bits but including FCS octets)

 

 

Packets Transmitted 512-1023 Octets

The total number of packets (including bad packets) received

 

that were between 512 and 1023 octets in length inclusive

 

(excluding framing bits but including FCS octets)

 

 

72

System Management Commands

Page 72
Image 72
Force10 Networks S2410s manual Packets Transmitted Octets