Force10 Networks S2410s manual Uploading from the Switch through Xmodem

Example of Configuring the Ethernet Management Port

(Force10 S2410)	(Config)#serviceport ip 10.11.197.177 255.255.0.0 10.11.197.190
(Force10 S2410)	(Config)#exit
(Force10 S2410)	#show serviceport
IP Address		10.11.197.177
Subnet Mask		255.255.0.0
Default Gateway		10.11.197.190
ServPort Configured Protocol Current		None
Burned In MAC Address		00:01:E8:99:99:9A
(Force10 S2410)	#

Figure 3 Example of Configuring the Ethernet Management Port

Uploading from the Switch through XMODEM

To copy to a PC through the console port with XMODEM, use the following command.

Command Syntax	Command Mode	Purpose
copy {nvram:startup-config	Privileged Exec	The options/file types are:
nvram:errorlog nvram:log		config — configuration file
nvram:traplog} xmodem://		errorlog — error (Event) log
filepath/filename		log — System log
		system trace — system trace
		traplog — trap log
		This starts the upload and also displays the mode of
		uploading and the type of upload it is and confirms the
		upload is taking place.
		If you are using HyperTerminal, specify which file is to be
		sent to the switch.

Downloading to the Switch through XMODEM

To download through the console port from a PC, use the following command:

Command Syntax	Command Mode	Purpose
copy xmodem://filepath/	Privileged Exec	Sets the destination (download) datatype to be an image
filename		(system:image) or a configuration file (nvram:startup-config).
{nvram:startup-config		If you are using HyperTerminal, specify which file is to be sent
system:image}		to the switch.
		The switch will restart automatically after the code has been
		downloaded.

SFTOS Command Reference for the S2410, Version 2.4.1.0 37