Force10 Networks S2410s manual Sntp broadcast client poll-interval

Chapter 11 SNTP Commands

This section provides a detailed explanation of the Simple Network Time Protocol (SNTP) commands. The commands are comprised of two functional groups:

•Configuration Commands configure features and options of the switch.

•Show commands display settings, statistics, and other information. For every configuration command there is a show command that displays the configuration setting.

This chapter describes the following commands:

•sntp broadcast client poll-interval

•sntp client mode on page 216

•sntp client port on page 216

•sntp unicast client poll-interval on page 217

•sntp unicast client poll-timeout on page 217

•sntp unicast client poll-retry on page 217

•sntp server on page 218

•show sntp on page 218

•show sntp client on page 219

•show sntp server on page 220

sntp broadcast client poll-interval

	This command sets the poll interval for SNTP broadcast clients in seconds as a power of two
	where poll-intervalcan be a value from 6 to 16.
Syntax	sntp broadcast client poll-interval poll-interval
	Use the no sntp broadcast client poll-intervalversion of this command to reset the poll
	interval for SNTP broadcast client back to its default value.
Default	6
Mode	Global Config

SFTOS Command Reference for the S2410, Version 2.4.1.0 215