Force10 Networks S2410s manual Show serial Fields of show serial Command Output

show serial

Table 14 Fields of show serial Command Output

Field	Description
Serial Port Login Timeout (minutes)	Specifies the time, in minutes, of inactivity on a serial
	port connection, after which the switch will close the
	connection. Any numeric value between 0 and 160 is
	allowed, the factory default is 5. A value of 0 disables
	the timeout
Baud Rate	The default baud rate at which the serial port will try to
	connect. The available values are 1200, 2400, 4800,
	9600, 19200, 38400,57600, and 115200 baud (bps).
	The factory default is 9600
Character Size	The number of bits in a character. The number of bits is
	always 8.
Flow Control	Whether hardware flow control is enabled or disabled. It
	is always disabled.
Stop Bits	The number of stop bits per character. The number of
	stop bits is always 1.
Parity	The parity method used on the serial port. The parity
	method is always None.

SFTOS Command Reference for the S2410, Version 2.4.1.0 93