Force10 Networks S2410s manual CLI Mode Diagram

Figure 5 CLI Mode Diagram

Note: In Release 2.4.1, you access the Interface VLAN mode from the Global Config mode with the command interface vlan vlanid.

Note: Some modes listed in Table 3 are unavailable in SFTOS 2.4.1, including the Stacking mode and Layer 3 protocol modes, such as OSPF and RIP.

Access to all commands beyond the User Exec mode can be restricted through the enable password, which you set with the enable passwd command. See enable passwd on page 142.

46 Using the Command Line Interface