Force10 Networks S2410s manual Mtu, Syntax no mtu

mtu

Example

(s50-1) (Config)#management route default 10.10.1.254

(s50-1) (Config)#interface managementethernet (Config-if-ma)#ip address 10.10.1.251 255.255.255.0 (Config-if-ma)#exit

(s50-1) (Config)#ip http server enable

(s50-1) (Config)#exit

(s50-1) #

(s50-1) #show interface managementethernet

IP Address	10.10.1.151
Subnet Mask	255.255.255.0
Default Gateway	10.10.1.254
Burned In MAC Address	00:01:E8:D5:A0:39
Locally Administered MAC Address	00:00:00:00:00:00
MAC Address Type	Burned In
Network Configuration Protocol Current	None
Management VLAN ID	1
Web Mode	Enable
Java Mode	Disable

Figure 8 Example of Configuring Management Address

Related
	interface managementethernet	Invokes the (Config-if-ma)# prompt, where you can set up a
Commands
		management IP interface (the ip address command; see next).
	ip address (management)	Configures the IP address of the management interface.
	show interface	Displays a summary of statistics for a specific port, including the
		management port, or a count of all CPU traffic based upon the
		argument.

mtu

This command sets the maximum transmission unit (MTU) size (in bytes) for physical and LAG (port channel) interfaces.

Syntax [no] mtu 1518-10240

For the standard implementation, the range of the MTU size is a valid integer between 1518-10240.

The no mtu command sets the default maximum transmission unit (MTU) size (in bytes) for the interface.

Default 1518

Note: 10-Gigabit ports use a chipset that does not automatically allow for the length of a tag. For 10-Gigabit ports, the default setting of 1518 means 1518 untagged or tagged. The maximum is 10240 bytes.

Mode Interface Config

SFTOS Command Reference for the S2410, Version 2.4.1.0 61