Force10 Networks S2410s manual Packets Received

show interface ethernet

The show interface ethernet display fields, when the argument is unit/slot/port, are as follows:

Table 8 Fields in Output of show interface ethernet unit/slot/port Command

Field	Description
Packets Received
Type	Indicates current type of use of the port, such as “PC Mbr” to
	indicate port channel member, “Mirror” to indicate source port
	for port-mirroring, “Probe” to indicate destination port for
	mirroring, and, most commonly, “Normal”.
Admin Mode	Whether the port is administratively enabled or disabled
Physical Mode	Whether the port is physically up or down
Physical Status	Whether the port is physically connected or disconnected
Speed	The port speed setting
Link Status	Whether the link is up or down.
MAC Address	MAC address of the port
Total Packets Received (Octets)	The total number of octets of data received by the processor
	(excluding framing bits but including FCS octets).
Octets Received	The total number of octets of data (including those in bad
	packets) received on the network (excluding framing bits but
	including Frame Check Sequence (FCS) octets). This object
	can be used as a reasonable estimate of ethernet utilization. If
	greater precision is desired, the etherStatsPkts and
	etherStatsOctets objects should be sampled before and after a
	common interval. ----- The result of this equation is the value
	Utilization which is the percent utilization of the ethernet
	segment on a scale of 0 to 100 percent.
Packets Received < 64 Octets	The total number of packets (including bad packets) received
	that were < 64 octets in length (excluding framing bits but
	including FCS octets).
Packets Received 64 Octets	The total number of packets (including bad packets) received
	that were 64 octets in length (excluding framing bits but
	including FCS octets).
Packets Received 65-127 Octets	The total number of packets (including bad packets) received
	that were between 65 and 127 octets in length inclusive
	(excluding framing bits but including FCS octets).
Packets Received 128-255 Octets	The total number of packets (including bad packets) received
	that were between 128 and 255 octets in length inclusive
	(excluding framing bits but including FCS octets).
Packets Received 256-511 Octets	The total number of packets (including bad packets) received
	that were between 256 and 511 octets in length inclusive
	(excluding framing bits but including FCS octets).
Packets Received 512-1023 Octets	The total number of packets (including bad packets) received
	that were between 512 and 1023 octets in length inclusive
	(excluding framing bits but including FCS octets).
Packets Received 1024-1518 Octets	The total number of packets (including bad packets) received
	that were between 1024 and 1518 octets in length inclusive
	(excluding framing bits but including FCS octets).

70 System Management Commands