Force10 Networks S2410s manual Radius server timeout, Show radius

radius server timeout

radius server timeout

	This command sets the timeout value (in seconds) after which a request must be retransmitted
	to the RADIUS server if no response is received. The timeout value is an integer in the range
	of 1 to 30.
Syntax	radius server timeout seconds
	The no radius server timeout command sets the timeout value to the default value, after
	which a request must be retransmitted to the RADIUS server if no response is received.
Default	6
Mode	Global Config

show radius

	This command is used to display the various RADIUS configuration items for the switch, as
	well as the configured RADIUS servers.
Syntax	show radius [servers]
Mode	Privileged Exec
	If the optional keyword servers is not included, the following RADIUS configuration items
	will be displayed:
	Primary Server IP Address—Indicates the configured server currently in use for authentication
	Number of configured servers—The configured IP address of the authentication server
	Max number of retransmits—The configured value of the maximum number of times a request packet is
	retransmitted
	Timeout Duration—The configured timeout value, in seconds, for request re-transmissions
	Accounting Mode—Yes or No
	If the optional keyword servers is included, the following information regarding configured
	RADIUS servers is displayed.
	IP Address—IP Address of the configured RADIUS server
	Port—The port in use by this server
	Type—Primary or secondary
	Secret Configured—Yes / No

184 Security Commands