Force10 Networks S2410s manual Show interface switchport

show interface switchport

Related
	ip address (management)	Configures the IP address of the management VLAN.
Commands
	show interface	Displays detailed statistics for a specific port or for all CPU traffic
		based upon the argument.
	show interface switchport	Displays a summary of statistics on Layer 2 interfaces.
	show interface ethernet	Displays detailed statistics for a specific ethernet port or for all CPU
		traffic based upon the argument.
	show serviceport	Displays the configuration of the Ethernet Management port.

show interface switchport

Syntax

Mode

Usage Information

This command displays a summary of statistics on Layer 2 interfaces.

show interface switchport

Privileged Exec

The display parameters of show interface, when the argument is switchport, are as follows:

Table 10 Fields in Output of show interface switchport Command

Field	Description
Packets Received Without Error	The total number of packets (including broadcast
	packets and multicast packets) received by the
	processor.
Broadcast Packets Received	The total number of packets received that were directed
	to the broadcast address. Note that this does not
	include multicast packets.
Packets Received With Error	The number of inbound packets that contained errors
	preventing them from being deliverable to a higher-layer
	protocol.
Packets Transmitted Without Error	The total number of packets transmitted out of the
	interface.
Broadcast Packets Transmitted	The total number of packets that higher-level protocols
	requested to be transmitted to the Broadcast address,
	including those that were discarded or not sent.
Transmit Packet Errors	The number of outbound packets that could not be
	transmitted because of errors.
Address Entries Currently In Use	The total number of Forwarding Database Address
	Table entries now active on the switch, including
	learned and static entries.

76 System Management Commands