Force10 Networks S2410s Serviceport protocol, Show arp switch, Communicating with the switch

serviceport protocol

Related
	serviceport protocol	Set the network configuration protocol to be used for configuring access to
Commands
		the Ethernet Management port.
	show serviceport	Display the IP configuration and MAC address of the Ethernet Management
		port.

serviceport protocol

Syntax

Default

Mode

Command

History

Related

Commands

This command specifies the network configuration protocol to be used for configuring access to the Ethernet Management port.

serviceport protocol {none bootp dhcp}

If you modify this value, the change is effective immediately.

Use the bootp keyword to require the switch to periodically send requests to a Bootstrap Protocol (BootP) server for an IP address for the port, or use dhcp to call a DHCP server until a response is received. The none keyword indicates that the Ethernet Management port should be manually configured with IP information.

none

Global Config

Version 2.4.1	Introduced.
serviceport ip	Set the IP, subnet mask, and IP gateway of the Ethernet Management port.
show serviceport	Display the IP configuration and MAC address of the Ethernet Management port.

show arp switch

	This command displays connectivity between the switch and other devices. The Address
	Resolution Protocol (ARP) cache identifies the MAC addresses of the IP stations
	communicating with the switch.
Syntax	show arp switch
Mode	Privileged Exec
Usage	Report fields include:

64 System Management Commands