Force10 Networks S2410s manual Mac access-group, Show mac access-lists name

mac access-group

mac access-group

Syntax

Parameters

Modes

Command History

Related Commands

This command attaches a specific MAC Access Control List (ACL) identified by name to an interface in the ingress direction. This command, when used in Interface Config mode, only affects a single interface, whereas the Global Config mode setting is applied to all interfaces.

mac access-group name [1-4294967295]in

The no mac access-groupname command removes the MAC ACL identified by name from the interface in the ingress direction.

name	The name must be the name of an existing MAC ACL.
1-4294967295	(OPTIONAL) Enter a sequence number that indicates the order of this
	ACL relative to other ACLs already assigned to this port channel. A lower
	sequence number indicates higher precedence order. If the selected
	number is already in use for this port channel, this ACL replaces the
	currently attached ACL using that sequence number. If you do not specify
	a number with this command, a number that is one greater than the
	highest sequence number currently in use for this port channel is used for
	this ACL.
in	The in parameter is required. SFTOS supports only the ingress direction.

Global Config, Interface Config; Interface Range, which is indicated by the (conf-if-range-interface)# prompt, such as (conf-if-range-vlan 10-20)#.

Version 2.3	Added Interface VLAN and Interface Range modes.
interface range	Defines an interface range and accesses the Interface Range mode
mac access-group (port	In the Interface Port Channel Config mode, attaches a MAC ACL to
channel)	the selected port channel
mac access-list extended	Creates a MAC Access Control List (ACL) identified by name,
	consisting of classification fields defined for the Layer 2 header of an
	Ethernet frame.
show mac access-lists	Displays the rules defined for the MAC access list specified by name.

show mac access-lists

	This command displays the rules defined for all MAC ACLs or that specified by name.
Syntax	show mac access-lists [name]
Mode	Privileged Exec

292 ACL Commands