Force10 Networks S2410s manual Show radius statistics authentication, Radius Accounting Server

show radius statistics (authentication)

Table 20 show radius accounting Command Example Fields

Field	Description
RADIUS Accounting Server	IP Address of the configured RADIUS accounting server
IP Address
Round Trip Time	The time interval, in hundredths of a second, between the most
	recent Accounting-Response and the Accounting-Request that
	matched it from the RADIUS accounting server.
Requests	The number of RADIUS Accounting-Request packets sent to this
	accounting server. This number does not include retransmissions.
Retransmissions	The number of RADIUS Accounting-Request packets retransmitted
	to this RADIUS accounting server.
Responses	The number of RADIUS packets received on the accounting port
	from this server.
Malformed Responses	The number of malformed RADIUS Accounting-Response packets
	received from this server. Malformed packets include packets with
	an invalid length. Bad authenticators and unknown types are not
	included as malformed accounting responses.
Bad Authenticators	The number of RADIUS Accounting-Response packets containing
	invalid authenticators received from this accounting server.
Pending Requests	The number of RADIUS Accounting-Request packets sent to this
	server that have not yet timed out or received a response.
Timeouts	The number of accounting timeouts to this server.
Unknown Types	The number of RADIUS packets of unknown types, which were
	received from this server on the accounting port.
Packets Dropped	The number of RADIUS packets received from this server on the
	accounting port and dropped for some other reason.

show radius statistics (authentication)

	This command is used to display the statistics for RADIUS or configured server. To show the
	configured RADIUS server statistic, the IP Address specified must match that of a previously
	configured RADIUS server. On execution, the following fields are displayed.
Syntax	show radius statistics [IP address]
Mode	Privileged Exec
	If the IP address is not specified, then only the Invalid Server Address field is displayed.
	Otherwise all the following listed fields are displayed:
	Invalid Server Addresses—The number of RADIUS Access-Response packets received from unknown
	addresses.
	Server IP Address—IP address of the server.

186 Security Commands