Force10 Networks S2410s manual Users snmpv3 accessmode, Users snmpv3 authentication

users snmpv3 accessmode

users snmpv3 accessmode

	This command specifies the SNMP v3 access privileges for the specified login user. The valid
	accessmode values are readonly or readwrite. The username is the login user name for
	which the specified access mode applies. The default is readwrite for ‘admin’ user;
	readonly for all other users.
	The no version of this command sets the snmpv3 access privileges for the specified login
	user as readwrite for the ‘admin’ user; readonly for all other users. The username is the
	login user name for which the specified access mode will apply.
Default	admin -- readwrite; other -- readonly
Syntax	[no] users snmpv3 accessmode username [readonly readwrite]
Mode	Global Config

users snmpv3 authentication

	This command specifies the authentication protocol to be used for the specified login user.
	The valid authentication protocols are none, md5 or sha. If md5 or sha are specified, the
	user login password is also used as the snmpv3 authentication password and therefore must
	be at least eight characters in length. The username is the login user name associated with
	the authentication protocol.
	The no version of this command sets the authentication protocol to be used for the specified
	login user to none. The username is the login user name for which the specified
	authentication protocol will be used.
Default	no authentication
Syntax	users snmpv3 authentication username [none md5 sha]
	users snmpv3 authentication username
Mode	Global Config

users snmpv3 encryption

This command specifies the encryption protocol to be used for the specified login user. The valid encryption protocols are des or none.

160 User Account Commands