Force10 Networks S2410s manual Disconnect, Show loginsession, Show users, Displays SSH sessions

disconnect

disconnect

	This command closes the designated remote session or all sessions.
Syntax	disconnect {sessionID all}
Mode	Privileged Exec

show loginsession

	This command displays current telnet and serial port connections to the switch. It also
	displays SSH sessions.
Syntax	show loginsession
Mode	Privileged Exec
ID	Login Session ID
Parameters	User Name—The name the user will use to login using the serial port or Telnet. A new user may be
	added to the switch by entering a name in a blank entry. The user name may be up to 8 characters, and
	is not case sensitive. The Read/Write user ‘admin’ is the only factory default.
	Connection From—IP address of the telnet client machine or EIA-232 for the serial port connection.
	Idle Time—Time this session has been idle.
	Session Time—Total time this session has been connected.
	Session Type—Source of connection—serial port, Telnet, etc.

show users

This command displays the configured user names and their settings. This command is only available for users with Read/Write privileges.

Syntax show users

Mode Privileged Exec

Parameters User Name—The name the user will use to login using the serial port, Telnet or Web. A new user may be added to the switch by entering a name in a blank entry. The user name may be up to eight characters, and is not case sensitive. The Read/Write user ‘admin’ is the only factory default.

158 User Account Commands