![Limit DCC Autodiscovery at Login](/images/new-backgrounds/112906/11290641x1.webp)
New Features and Functionality
Limit DCC Autodiscovery at Login
A check box on the CTC Login dialog box allows you to limit DCC autodiscovery so you can open a single or selected group of ONS 15327s residing in a network.
Figure 3 Login Dialog Box
Login node
Login node group
55020
Multi-Circuit Operations
CTC allows you to modify selector settings on a set of circuits. If you select a set of circuits and make changes to selectors, the changes are applied
Baseline Button
In CTC Release 3.3, the Baseline button located on the far right of the Performance Monitoring screen clears the PM count displayed in the Current column, but does not clear the PM count on the card. When the current
Clear Button
The Clear button located on the far right of the Performance Monitoring screen clears certain PM counts depending on the option selected. When the Clear button is clicked, three options appear in the Clear Statistics menu: Selected interfaces, All interfaces on port x, and All interfaces on card.
When you clear selected interfaces, all PM counts associated with the selected radio buttons are erased. For example, if the “15 min” and the Near End buttons are selected and you click the Clear button, all
When you clear all interfaces on port x, all PM counts associated with all combinations of the radio buttons on the selected port are erased from the card and the screen. This means the
When you clear all interfaces on the card, PM counts for all data and ports on all interfaces are erased from the card and the screen.
Release Notes for Cisco ONS 15327 Release 3.3
| 21 |
| |
|
|