Cisco Systems ONS 15327 manual Release 1.0.X TL1 Commands Changed as of Release, TL1 COMMAND

New Features and Functionality

Release 1.0.X TL1 Commands Changed as of Release 3.3

	TL1 COMMAND		DESCRIPTION OF CHANGES
	ALW-MSG-ALL		The two commas at the end of the command are not needed anymore.
	INH-MSG-ALL
	ALW-SWDX-EQPT		Semi-colons after the CTAG field are not required anymore.
	DLT-CRS-<STS_PATH>		Trailing semi-colons after the CTAG are optional.
	DLT-CRS-VT1
	ED-BITS		Added support for the Sync Message field. An extra colon is needed after CTAG
			field. The colon after the PST field is not necessary. The Name string in Name/Value
			parameter changed.
	ED-EC1		Added support for the Rx Equalization attribute for an EC1 port. The extra colon
			after the PST field is not required anymore.
	ED-T1		Removed support for the ID field. Three colons after the CTAG field are now
			required, instead of two. The extra colon after the PST field is not required anymore.
			Added support for Test Access.
	ED-T3		Three colons are needed after CTAG field, instead of two. The extra colon after the
			PST field is not required anymore. Added support for Test Access.
	ED-<OCN_TYPE>		Added support for the send DUS and Synchronous Status Message fields. The extra
			colon after the PST field is not required anymore. Three colons are needed after the
			CTAG field instead of two.
	ENT-CRS-<STS_PATH>		Cross-connect types are optional. The default is 2WAY. Supported Cross Connect
			types are now limited to 1WAY and 2WAY.
	ENT-FFP-<OCN_TYPE>		An extra colon after the CTAG field is required. Name field in name/value
	ED-FFP-<OCN_TYPE>		parameters have changed.
	ED-EQPT		This family of commands was functionally expanded to edit/enter/retrieve
	ENT-EQPT		equipment attributes and electrical 1:1 and 1:N Protection Group. Use these
			commands instead of ED/ENT/RTRV-FFP-EQPT.
	RTRV-EQPT
	ED-USER-SECU		Added support for a NEW USER ID field. Fields are now positional instead of
			name/value pairs.
	ENT-USER-SECU		An extra comma is needed after the PASSWORD field.
	ED-<STS_PATH>		Added support for following fields: Revertive Mode, Revertive Time, Expected Path
			Trace, Path Trace Message, and Path Trace Mode. Added support for Test Access.
	INIT-SYS		Phase Field (Level of Initialization) is not supported anymore.
	OPR-LPBK-<MOD2_IO>		The Loopback Type field is now optional.
	RLS-LPBK-<MOD2_IO>
		Release Notes for Cisco ONS 15327 Release 3.3
34			OL-2671-01