Cisco Systems manual Conditions Replaced as of ONS 15327 Release, Alarm Description, Type

New Features and Functionality

•NHSWPR - Inhibit switch to protect request on equipment

•NHSWWKG - Inhibit switch to working request on equipment

The following new BER alarm conditions have been added:

Condition	Alarm Description	Type
SD-L	BER Threshold exceeded for	Line
	Signal Degrade
SD-P	BER Threshold exceeded for	Path
	Signal Degrade
SF-L	BER Threshold exceeded for	Line
	Signal Failure
SF-P	BER Threshold exceeded for	Path
	Signal Failure

Conditions Replaced as of ONS 15327 Release 3.3

The SWFTDWN condition has been changed to SFTWDOWN.

Changed Conditions as of ONS 15327 Release 3.3

The following condition is changed as of ONS 15327 Release 3.3.

The FAIL_DS3_NE_FRM_MISMATCH condition is renamed to DS3-MISM.

New Parameters as of ONS 15327 Release 3.3

The following TL1 parameters are new in the Condition table (new conditions) as of ONS 15327 Release 3.3:

EQPT-MISS — Replaceable equipment/unit is missing

EXERCISE-RING-FAIL — Exercise ring failed

EXERCISE-SPAN-FAIL — Exercise span failed

EXERCISE-RING-REQ — Exercise ring request

EXERCISE-SPAN-REQ — Exercise span request

EXERCISING-RING — Exercise ring completed

EXERCISING-SPAN — Exercise span completed

FE-EXERCISING-RING — Far end exercise ring completed

FE-EXERCISING-SPAN — Exercise span completed

WTR-RING — SONET ring is in Wait to Restore state

The following TL1 parameters are new in the ALL_MONTYPE table as of ONS 15327 Release 3.3:

•CVS

•ESS

•SESS

Release Notes for Cisco ONS 15327 Release 3.3

OL-2671-01 31