Caveats
BLSR Support for Mixed Node Networks
The ONS 15327 is supported for BLSR in combination with ONS 15454 nodes only if Release 3.3 is installed and running on all BLSR nodes. If you wish to provision a BLSR on a combination of ONS 15327 and ONS 15454 nodes, you should upgrade to Release 3.3 on all ONS 15454 and ONS 15327 nodes first.
UPSR Functionality
DDTS # CSCdx40081
If, in an
Deleting one or more VT circuits in the same situation may also cause an STS3C traffic hit. It is not known when or if this issue will be resolved.
TL1
Note To be compatible with TL1 and DNS, all nodes must have valid names. Node names should contain alphanumeric characters or hyphens, but no special characters or spaces.
TL1 Gateway Network Elements
The ONS 15327 cannot act as a TL1 Gateway Network Element in Release 3.3.
Changes in TL1
In Release 3.3, TL1 output has changed to conform to Telcordia standards as follows:
•The time period parameter has changed from 15MIN to
•The direction parameter, BTH, is no longer included in the output. Only TRMT, or RCV is valid.
•The mondat and montm parameters have been added to the end of output.
For example:
In Releases 1.0.x, you would see:
>
<
M 1 COMPLD
Release Notes for Cisco ONS 15327 Release 3.3
| 5 |
| |
|
|