Cisco Systems ONS 15327 manual Opr-Protnsw-Ocntype

	New Features and Functionality
OPR-PROTNSW-<OCN_TYPE>	Added support for the SWITCH command field.
INIT-REG-<MOD2>	Added support for an optional Location field. Now only one comma is needed
RTRV-PM-<MOD2>	(instead of two) after the Time Period field.
REPT ALM BITS	Output – The Condition description field is now optional.
REPT ALM SYNCN
REPT ALM <MOD2ALM>	The Description and Equipment Type fields are now optional.
REPT ALM EQPT
REPT EVT <MOD2ALM>
REPT ALM EVT	The positions of the Description and Equipment Type fields have changed.
REPT EVT SYNCN	Output – Condition and Condition Description are now optional. Requires 7
	commas (instead of 6) after the Condition Effect field. Added support for the Aid
	Type field.
RTRV-ALM-BITS	Output – Added support for the Aid Type field.
RTRV-ALM-SYNCN
RTRV-BITS	Output – Added support for the Sync Messaging field.
RTRV-COND-ALL	One less comma is needed after the Condition field.
RTRV-COND-BITS	Requires two commas (instead of three) after the Condition field.
RTRV-COND-SYNCN
RTRV-CRS-<STS_PATH>	Semi-colons after the CTAG are no longer required.
RTRV-CRS-VT1
RTRV-ALM-EQPT	Use one less comma after the Service Affect field.
RTRV-COND-EQPT
RTRV-ALM-MOD2
RTRV-COND-MOD2
RTRV-ALM-ALL
RTRV-EC1	The four colons after the CTAG field are now optional.
	Output – Added support for the Rx Equalization field.
RTRV-FFP-EQPT	Output – Name field in Name/Value parameters changed.
RTRV-INV	Output – Requires two colons (instead of one) after the Aid Type field.
RTRV-LOG	Requires an additional logname field.
RTRV-<OCN_TYPE>	The four colons after the CTAG field are now optional.
	Output – Added support for the following fields: Sync Status Messaging, Send DUS,
	Ring ID, and BLSR Type. Dropped support for Revertive Time.
	Release Notes for Cisco ONS 15327 Release 3.3
OL-2671-01		35