Cisco Systems manual TL1 Commands New for ONS 15327 Release, Category

New Features and Functionality

RTRV-<STS_PATH>	Output – Added support for the following fields: Revertive Mode, Revertive Time,
	Expected Path Trace, Path Trace Message, Incoming Path Trace, Path Trace Mode
	and Test Access.
RTRV-SYNCN	Output – Replaced the Primary, Secondary, and Third fields with Rank of
	Synchronization Reference, Value of a Sync Ref, Quality of Sync Source, and Status
	of Signal Source.
RTRV-TOD	Output – Requires one comma (instead of two) after the Seconds field.
RTRV-T1	The four colons after the CTAG field are now optional.
RTRV-T3	Output – Dropped support for the ID field.
SET-TOD	The Name string in the Name/Value parameter has been changed from USEDST to
	DST
SW-DX-EQPT	The comma after the optional Mode field is no longer necessary.

TL1 Commands New for ONS 15327 Release 3.3

Note Refer to the TL1 Command Guide for new command descriptions.

	CATEGORY		COMMAND
	BLSR		ED-BLSR
			RTRV-BLSR
			RTRV-COND-RING
			REPT ALM RING
			REPT COND RING
			REPT EVT RING
			RTRV-ALM-RING
			RTRV-ALM-COND
	ENVIRONMENT		RTRV-ATTR-CONT
			RTRV-ATTR-ENV
			RTRV-EXT-CONT
			SET-ATTR-CONT
			SET-ATTR-ENV
			OPR-EXT-CONT
			REPT EVT ENV
			RTRV-COND-ENV
			REPT EVT COM
			RLS-EXT-CONT
		Release Notes for Cisco ONS 15327 Release 3.3
36			OL-2671-01