Force10 Networks S2410s manual Ip telnet maxsessions, Ip telnet timeout, Minutes, to the default

ip telnet maxsessions

•telnetcon maxsessions on page 91

•telnetcon timeout on page 90

ip telnet maxsessions

Syntax

Default

Mode

Command History

This command specifies the maximum number of Telnet connection sessions that can be established.

ip telnet maxsessions 0-5

A value of 0 indicates that no Telnet connection can be established. The range is 0 to 5.

The command no telnet maxsessions sets the maximum number of Telnet connection sessions that can be established to the default value.

5

Global Config

Version 2.3 Changed from telnetcon maxsessions and moved from Privileged Exec mode to Global Config.

ip telnet timeout

	This command sets the Telnet connection session timeout value, in minutes. A session is
	active as long as the session has been idle for the value set. .
		Note: Changing the timeout value for active sessions does not become effective until
		the session is reaccessed. Any keystroke will also activate the new timeout duration.
Syntax	ip telnet timeout 1-160
	The time is a decimal value from 1to 160.
	The no ip telnet timeout command sets the Telnet connection session timeout value, in
	minutes, to the default.
Default	5 (minutes)
Mode	Global Config

88 System Management Commands