Force10 Networks S2410s manual Clear dot1x statistics, Clear radius statistics, Dot1x defaultlogin

clear dot1x statistics

Mode

Related Commands

The no version of this command deletes the specified authentication login list. The attempt to delete fails if any of the following conditions are true:

•The login list name is invalid or does not match an existing authentication login list

•The specified authentication login list is assigned to any user or to the non configured user for any component

The login list is the default login list included with the default configuration and was not created using ‘authentication login’. The default login list cannot be deleted.

Global Config

radius server host	Configure the RADIUS authentication and accounting server.
tacacs-server host	Specify a TACACS+ server host.
show authentication

clear dot1x statistics

	This command resets the 802.1x statistics for the specified port or for all ports.
Syntax	clear dot1x statistics {unit/slot/port all}
Mode	Privileged Exec

clear radius statistics

	This command is used to clear all RADIUS statistics.
Syntax	clear radius statistics
Mode	Privileged Exec

dot1x defaultlogin

This command assigns the authentication login list to use for non-configured users for 802.1x port security. This setting is over-ridden by the authentication login list assigned to a specific user if the user is configured locally. If this value is not configured, users will be authenticated using local authentication only.

170 Security Commands