Force10 Networks S2410s Monitor session 1 mode, No monitor, Syntax no monitor session 1 mode

monitor session 1 mode

monitor session 1 mode

This command sets the monitor session (port monitoring) mode to enabled. The probe and monitored ports must be configured before port monitoring can be enabled. When enabled, the probe port monitors all traffic received and transmitted on the physical monitored port. It is not necessary to disable port monitoring before modifying the probe and monitored ports.

A session is operationally active if and only if both a destination port and at least one source port is configured. If neither is true, the session is inactive.

A port configured as a destination port acts as a mirroring port when the session is operationally active. If it is not, the port acts as a normal port and participates in all normal operation with respect to transmitting traffic.

Syntax [no] monitor session 1 mode

The no version of this command sets the monitor session (port monitoring) mode to disabled.

Default disabled

Mode	Global Config
Related
	monitor session	Adds a mirrored port (source port) or mirroring port (destination
Commands		port) to a session identified with the session ID of 1.
	no monitor	Removes the destination port and all source ports from the mirroring
		configuration.
	show monitor session	Shows the mirroring configuration.

no monitor

This command removes all the source ports and a destination port and restores the default value for mirroring session mode for all the configured sessions.

This is a stand-alone “no” command. This command does not have a “normal” form.

Default enabled

Syntax no monitor

Mode Global Config

SFTOS Command Reference for the S2410, Version 2.4.1.0 113