Lincoln Electric IM511-D manual Recommended Equipment, Stick, Wire Feed

RECOMMENDED EQUIPMENT

STICK

K702 Accessory Kit which includes:

•Electrode holder and cable

•Work clamp and cable

•Headshield

K857 Remote Control Kit is optional for remote current control.

TIG

Magnum™ TIG Torch

Magnum Parts Kit and Argon gas

K930-1 TIG Module

K936-1 Control Cable

Optional:

K939-1 TIG Module Docking Kit

K963 Hand Amptrol™

K870 Foot Amptrol

K814 Arc Start Switch

WIRE FEED

LN-25 (K428 or K446) with K624-1 42 Volt Remote Output Control Module - Requires K626-xx Control Cable. Provides "cold" electrode until gun trigger is pressed. Voltage control is at the feeder. K446 LN-25 includes gas solenoid.

LN-25 (K449) Includes internal contactor for across the arc operation (no control cable). Provides "cold" electrode until gun trigger is pressed. Includes gas solenoid. K444-1 Remote Voltage Control Kit is required for voltage control at the feeder.

LN-742 (K617-1 or K618-1) or LN-742H (K617-2 or K618-2), requires K619-xx Input Cable Assembly. Provides "cold" electrode until gun trigger is pressed. Includes gas solenoid. K589-1 Remote Control Kit connects to the LN-742 to provide remote voltage and wire speed control or K857 Remote Voltage Control Kit connects to the Ranger 9 for voltage control at the feeder.

LN-7 (K521) or LN-7 GMA (K440), requires K584-xx Input Cable Assembly. Provides "cold" electrode until gun trigger is pressed. K440 LN-7 GMA included gas solenoid. K8567 Remote Voltage Control Kit is required for voltage control at the feeder. Ranger 9 must be operated at "HIGH" idle.

Magnum Gun is required for gas-shielded welding. Innershield Gun is required for gas-less welding.

- 10 -