Lincoln Electric IM511-D manual Machine, Engine, Specifications

SPECIFICATIONS

Machine

Product	Ordering	Description	Rated DC Output *	Auxiliary Power for	AC Power **
Name	Information		Amps / Volts / Duty Cycle	Wire Feeders
Ranger 9	K1420-1	250 Amp	AC Constant Current	42V, 60 Hz, 8 Amps	9,000 Watts
(Onan)					60 Hz. DC
		AC/DC	250A / 25V / 100%
	K1420-2
		Multi-Process		115V, 60 Hz, 8 Amps
	CSA(Meets				80 Amps @
		Arc Welder	DC Constant Current
	Canadian
			250A / 25V / 100%		115V
	Standards)
		with
			DC Constant Voltage		40 Amps @
		9,000 Watts AC	250A / 25V / 100%		230V
		Auxiliary
	K1421-1
Ranger 9		Power	Max OCV @ 3700 RPM
(Kohler)	CSA		80V
	(Meets
	Canadian
	Standards)

*Based on a 10 min. period.

**When welding, available AC auxiliary power will be reduced.

115V will operate either 60Hz or 50/60Hz power tools, lights, etc.

Dimensions

&Weight

30.3x 19.2 x 42.3 in

(770 x 488 x 1075 mm)

598 lbs (272 kg)

30.3 x 19.2 x 42.3 in

(770 x 488 x 1075 mm)

591 lbs (269 kg)

Engine

Product	Description	Horsepower	Operating	Displacement	Ignition	Capacities
Name			Speeds
Ranger 9	2 Cylinder		Full Load:	47.7 cu in	12V Battery, 430	Fuel:
(Onan P218)	4 Cycle	18 HP	3500 RPM	(782 cc)	Cold Cranking	9 Gal (34 L)
	Air-Cooled	@ 3600 RPM			Amps, Toggle Start
	Gasoline Engine.		High Idle:		Switch, Charging	Lubricating Oil:
	Aluminum Alloy		3700 RPM		Ammeter, Manual	1.8 Qts (1.7 L)
	Block with Cast Iron				Choke
	Liners, Electronic		Low Idle:
	Ignition		2200 RPM
Ranger 9		20 HP		38.1 cu in		Fuel:
(Kohler Command		@ 3600 RPM		(624 cc)		9 Gal (34 L)
CH20S)
						Lubricating Oil:
						2.0 Qts (1.9 L)

- 8 -