Lincoln Electric IM511-D manual Optional Features

OPTIONAL FEATURES

A)K768-2 Two Wheel Undercarriage

For in-plant and yard towing. (For highway use, consult applicable federal, state, and local laws regarding possible requirements for brakes, lights, fenders, etc.) Two 4.80 x 12" four-ply tubeless tires. Bed-plate mounting. Has stand for tow bar and grips for hand pulling. Overall width 43.06" (1.09 m).

B)K886-1 Canvas Cover

To protect the Ranger 9 when not in use. Made from attractive red canvas material that is flame retardant, mildew resistant, and water repellent.

C)K894-1 Spark Arrester Kit

Includes a heavy gauge steel, approved spark arrester and clamp for easy mounting to muffler exhaust pipe.

D)K896-1 GFCI Receptacle Kit

Includes two UL approved 115 Volt ground fault circuit interrupter duplex type receptacles with covers and installation instructions. Replaces the two factory installed 115 Volt duplex receptacles. Each recepta- cle of each GFCI duplex is rated at 15 Amps but the maximum total current from each GFCI duplex is limited to 20 amps.

E)K930-1 TIG Module

Provides high frequency and shielding gas control for AC and DC GTAW (TIG) welding applications. Compact case is designed for easy carrying, complete with handle. High frequency bypass is built in. The K939-1 Docking Kit is available for mounting the TIG Module on top of the Ranger 9. The K936-1 control cable is required.

F)K933-1 Four Wheel Undercarriage

Allows movement of the Ranger 9 by hand without lifting. Easily assembles to the Ranger 9. It includes two rugged, hard molded wheels and two durable pneumatic tires. The spring loaded handle provides convenient, comfortable steering. The k934-1 Bracket is available for mounting a gas cylinder on the under- carriage.

G)K934-1 Bracket for Mounting a Gas Cylinder to a K933-1 Undercarriage

Easily mounts on the back of the K933-1 Four Wheel Undercarriage to carry a welding gas cylinder.

H)K889-2 Two Wheel Undercarriage

For moving by hand. Two 4.00" x 8" industrial tires. Overall width 29" (.74m).

I)K857 Remote Control

Consists of a control box with 25' (7.5 m) of four conductor cable. Permits remote adjustment of output voltage.

J)K893-1 Caster for Two Wheel Undercarriage

Mounts to the front of the K889-2 Two-Wheel Undercarriage to allow easy movement on smooth surfaces. Includes a 6" diameter hard rubber wheel with a convenient toe-on, toe-off locking brake.

K)K702 Accessory Kit

Accessory Set includes 35 ft. 2 AWG electrode cable,

30 ft. 2 AWG work cable, headshield with number 12 filter, work clamp, and Cooltong® 300 electrode holder. Cables are rated at 250 Amps, 40% duty cycle.

L)K802-R Power Plug Kit

Provides four 115 Volt plugs rated at 15 Amps each and one dual voltage, full KVA plug rated at 115/230 Volts, 50 amps.

M)K802-N Power Plug KIt

Provides four 115 Volt plugs rated at 20 Amps each and one dual voltage, full KVA plug rated at 115/230 Volts, 50 Amps. (Not for use with K1420-2 CSA machine and machines with GFCI receptacles.)

- 9 -