Force10 Networks S2410s manual Spanning-tree forward-time, Spanning-tree hello-time

spanning-tree forward-time

Syntax [no] spanning-tree forceversion 802.1d 802.1w 802.1s

Default 802.1s

Mode Global Config

spanning-tree forward-time

	This command sets the Bridge Forward Delay parameter to a new value for the common and
	internal spanning tree. The forward-time value is in seconds within a range of 4 to 30, with
	the value being greater than or equal to "(Bridge Max Age / 2) + 1".
	The no version of this command sets the Bridge Forward Delay parameter for the common
	and internal spanning tree to the default value, in other words, 15.
Syntax	[no] spanning-tree forward-time 4-30
Default	15
Mode	Global Config

spanning-tree hello-time

Syntax

Default

Mode

Command

History

Related

Commands

This command sets the Admin Hello Time parameter to a new value for the common and internal spanning tree.

spanning-tree hello-time 1-10

The hellotime value is in whole seconds within a range of 1 to 10 with the value being less than or equal to "(Bridge Max Age / 2) - 1".

The no spanning-treehello-timecommand sets the admin Hello Time parameter for the common and internal spanning tree to the default value.

2

Interface Config; Interface Range, which is indicated by the (conf-if-range-interface)# prompt, such as (conf-if-range-vlan 10-20)#.

Version 2.3	Added Interface Range mode.
interface	Identifies an interface and enters the Interface Config mode.
interface range	Defines an interface range and accesses the Interface Range mode

268 Spanning Tree (STP) Commands