Force10 Networks S2410s manual Ip http secure-server enable, Ip http server enable

ip http secure-server enable

ip http secure-server enable

Syntax

Default

Mode

Command History

This command is used to enable the secure socket layer for secure HTTP.

The no version of this command is used to disable the secure socket layer for secure HTTP.

Note: This command requires keys/certificates to be generated offline before the service will start. See s50-secure-management.pdf at (log-in required): https://www.force10networks.com/csportal20/KnowledgeBase/Documentation.aspx

[no] ip http secure-server enable disabled

Global Config

Version 2.3	Modified: Moved from Privileged Exec mode to Global Config mode and added
	enable to the command.

ip http server enable

Syntax

Default

Mode

Command History

Related Commands

This command enables access to the switch through the Web User Interface (Web UI) of SFTOS. When access is enabled, the user can log in to the switch from the Web UI.

[no] ip http server enable

Use no ip http server enable to disable access to the switch through the Web UI. When access is disabled, the user cannot login to the switch's Web server. Disabling the Web UI takes effect immediately. All interfaces are affected.

enabled Global Config

Version 2.3	Modified: Moved from Privileged Exec mode to Global Config mode and added
	enable to the command.
ip address (management)		Configures the IP address of the management interface.
ip http secure-server enable		Enable the secure socket layer for secure HTTP.
show ip http		Displays the HTTP settings for the switch.

SFTOS Command Reference for the S2410, Version 2.4.1.0 197