Force10 Networks S2410s manual Show radius accounting statistics, Radius Accounting Mode

show radius accounting statistics

show radius accounting statistics

	This command is used to display the configured RADIUS accounting mode, accounting
	server, and the statistics for the configured accounting server.
Syntax	show radius accounting [statistics IP address]
Mode	Privileged Exec
	If the optional keyword statistics IP address is not included, then only the accounting mode
	and the RADIUS accounting server details are displayed, as listed here:

Example

(S50-TAC-5) #show	radius accounting
RADIUS Accounting	Mode	Disable
IP Address		1.1.1.1
Port		1813
Secret Configured		NoForce10#

Figure 43 show radius accounting Command Example

Table 19 show radius accounting Command Example Fields

Field	Description
RADIUS Accounting Mode	Enabled or disabled
IP Address	The configured IP address of the RADIUS accounting server
Port	The port in use by the RADIUS accounting server
Secret Configured	Yes or No

If the optional keyword statistics IP address is included, the statistics for the configured RADIUS accounting server are displayed. The IP address parameter must match that of a previously configured RADIUS accounting server. The following information regarding the statistics of the RADIUS accounting server is displayed.

Example

(S50-TAC-5) #show radius accounting accounting statistics 1.1.1.1

RADIUS Accounting Server IP Address	1.1.1.1
Round Trip Time	0.00
Requests	0
Retransmissions	0
Responses	0
Malformed Responses	0
Bad Authenticators	0
Pending Requests	0
Timeouts	0
Unknown Types	0
Packets Dropped	0

Figure 44 show radius accounting statistics IP address Command Example

SFTOS Command Reference for the S2410, Version 2.4.1.0 185