Force10 Networks S2410s manual Dot1x user, Show authentication

dot1x user

Default

Mode

Command

History

Related

Commands

tx-period—Sets the value, in seconds, of the timer used by the authenticator state machine on this port to determine when to send an EAPOL EAP Request/Identity frame to the supplicant. The quiet-period must be a value in the range 1 - 65535.

supp-timeout—Sets the value, in seconds, of the timer used by the authenticator state machine on this port to timeout the supplicant. The supp-timeout must be a value in the range 1 - 65535.

server-timeout—Sets the value, in seconds, of the timer used by the authenticator state machine on this port to timeout the authentication server. The supp-timeout must be a value in the range 1 - 65535.

reauth-period: 3600 seconds

quiet-period: 60 seconds

tx-period: 30 seconds

supp-timeout: 30 seconds

server-timeout: 30 seconds

Interface Config; Interface Range, which is indicated by the (conf-if-range-interface)# prompt, such as (conf-if-range-vlan 10-20)#.

Version 2.3	Interface Range mode added
show dot1x	Display data on the dot1x configuration, for a specified port or all ports,

dot1x user

This command adds the specified user to the list of users with access to the specified port or all ports. The user parameter must be a configured user.

The no version of this command removes the user from the list of users with access to the specified port or all ports.

Syntax	dot1x user user {unit/slot/port all}
Mode	Global Config
Related
	show dot1x users	Display 802.1x port security user information for locally configured users.

Commands

show authentication

This command displays the ordered authentication methods for all authentication login lists.

SFTOS Command Reference for the S2410, Version 2.4.1.0 175