Force10 Networks S2410s manual Show interfaces cos-queue, Show interfaces random-detect

show interfaces cos-queue

Report Fields Non-IP Traffic:

Class—The traffic class used for non-IP traffic. This is only displayed when the COS trust mode is set to either 'trust ip-dscp' or 'trust ip-precedence'.

Untrusted Traffic Class—The traffic class used for all untrusted traffic. This is only displayed when the COS trust mode is set to 'untrusted'.

show interfaces cos-queue

	This command displays the class-of-service queue configuration for the specified interface.
Syntax	show interfaces cos-queue [unit/slot/port]
	The unit/slot/port parameter is optional, and , if specified, the class-of-service queue
	configuration of the interface is displayed. If omitted, the most recent global configuration
	settings are displayed.
Mode	Privileged Exec
Report Fields	Interface—This displays the unit/slot/port of the interface. If displaying the global configuration, this
	output line is replaced with a “Global Configuration” indication.
	Interface Shaping Rate—The maximum transmission bandwidth limit for the interface as a whole. It is
	independent of any per-queue maximum bandwidth value(s) in effect for the interface.
	The following information is repeated for each queue on the interface:
	Queue ID—Queue identification number
	An interface supports n queues numbered 0 to (n-1). The specific n value is platform dependent.
	Min. Bandwidth—The minimum transmission bandwidth guarantee for the queue, expressed as a
	percentage. A value of 0 means bandwidth is not guaranteed and the queue operates using best-effort.
	Scheduler Type—Indicates whether this queue is scheduled for transmission using a strict priority or a
	weighted scheme.
	Queue Management Type—The queue depth management technique used for all queues on this
	interface.

show interfaces random-detect

This command displays the weighted random early discard (WRED) configuration for each supported drop precedence level of each queue for the specified interface.

282 Quality of Service (QoS) Commands