Konica Minolta 7020 instruction manual Copy Interrupt, Job Memory Save and Recall Job Settings

8. Other Basic Functions

8.4 Copy Interrupt

This function allows to interrupt a copy job that is being proces- sed, in order to quickly produce a few copies in-between. The settings of the initial job and the image memory remain.

–Press the INTERRUPT key on the operation panel. The key blinks first and lights as soon as the unit is available.

–Set the required functions and select the copy quantity.

–Position the originals and press START.

–After the in-between copies have been made, press INTERRUPT again to switch the function off.

–Press START, to complete the previous job.

A special tab indicates the screen for in-between copying.

8.5 Job Memory: Save and Recall Job Settings

This function allows to save all settings for frequently needed jobs once, and to recall them whenever needed.

–The settings for 15 jobs can be saved. (The key operator can ‘lock‘ saved jobs to protect them against inadvertent deletion.)

–All basic functions, all special funtions, as well as the finishing settings and the copy quantity can be programmed and saved.

–Enter your required selections.

–On the operating panel, press the APPLICATION key to call up the display shown on the left. Now press JOB MEMORY and ENTRY next.

–The following screen displays all selections made. Press OK to call up the Job Store screen.

32