6. Before Copying
6.1 Weekly Timer
Please contact the operator if a timer interrupt password is needed or a change of the ON/OFF times is required.
The copier provides a timer function that can be activated by the operator. In this case, please do not switch the unit on and off at the main power switch; the machine turns on and off automatically.
Timer Interrupt
–Press the Power switch on the left side of the panel.
–A four digit timer interrupt password is needed if the operator has installed a password. Enter the code and touch START.
–Now specify the actual
–After the specified period, the system will automatically go off again.
6.2 User Password / Electronic Key Counter (EKC)
The message on the screen instructs you to enter a user password.
This unit has an integrated electronic key counter, which mana- ges up to 128 user accounts. Copies can be allocated to users, accounts or projects, if the key operator has activated this func- tion. A copy limit can be allocated to each counter.
If the electronic key counter is activated in this unit, a user pass- word has to be entered to access the machine. Please contact your key operator, if you need a password or can‘t remember your allocated password.
Password Access:
–After switching on the system, a request to enter a password is displayed on the screen.
–Enter your
–If you hit a wrong key, still enter 5 digits in total, and then press START. Now repeat the procedure with the correct code.
–The number of copies made as well as the copy limit for this counter are now displayed for a moment.
–If the copy limit has been reached for any password, the system will not produce any further copies under this code. Depending on how the copier is adjusted, a copy job in progress can either be completed or will be interrupted.
22
