9.Special Functions
9.2.2OHP Function
This function allows copying onto OHP films as well as automatic insertion of blank or copied sheets into the set of transparencies.
–OHP films can only be fed via the
–Only A4 size is possible.
–Copy preselection is fixed to one (1) copy.
–Position originals in the RADF*. If you want to position your originals on the platen glass, select the Store Mode and scan each original by pressing the SCAN key.
OHP
Each original is copied onto an OHP film.
OHP films with blank interleaves
Each original is copied onto an OHP film. Blank interleaves and copied OHP films exit alternatingly.
OHP films with copied interleaves
Each original is copied onto paper and onto an OHP film. Copied interleaves and copied OHP films exit alternatingly.
9.2.3 | Chapter |
|
| ||
|
| Originals |
| Copies | |
|
|
|
|
| 7 |
|
|
|
|
| 5 |
|
|
| 7 8 | 3 | 8 |
|
|
|
| ||
|
|
|
| 6 | |
|
|
| 4 5 |
| |
|
| 3 |
| 4 | |
| 1 | 2 | 6 |
| 2 |
|
| 1 |
| ||
|
|
|
|
| |
| Front Pages |
|
| ||
When duplex copying, you can use this function to start each new chapter on a right (front) page. Up to 15 positions can be specified for chapter beginnings, with page numbers up to 999. This function is only possible in combination with duplex copying 1 3 2 or 2 3 2.
Chapter can be combined with the Booklet function. Or special (e.g. coloured) paper can be selected for the specified pages; this paper is then fed from the sheet insertion tray.
–Select the function and use the keypad, to enter page num- bers for front pages. The first entry should be an even page number.
–Press SET after each entry. If you want to change an entry, press DELETE.
–After entering all required page numbers, confirm by pressing OK, until you have returned to the Basic screen.
–1 3 2 is automatically selected. Change this to 2 3 2 for
–Position originals in the RADF*. If you want to position your originals on the platen glass, select the Store Mode and scan each original by pressing the SCAN key.
40 | * Option |
