5. How to Supply Paper, Toner, Staples
Loading Paper in DB-409*
1. Withdraw the tray from the unit as far as it will go.
2. Fan the paper before inserting it!
3. Stack paper into the tray with the curly side up. Paper must not be stacked higher than the red mark. If trays are over- stacked, the system might not copy!
4. Push the paper into the unit. Do not change copy size!
Multi-Sheet Bypass
The sheet bypass is located on the right of the unit. Paper in sizes A3 to A5R can be processed, as well as thick and thin paper, OHP films and special materials (e.g. labels, transparencies).
1. Open the bypass tray.
2. Insert the paper and adjust the paper guides.
3. To copy onto the material inserted into the bypass tray, press the PAPER SIZE key in the basic screen and in the next screen, select the sheet bypass with the corresponding key.
5.2 Supply Toner
If the toner runs low, a warning message appears in the LCD.
Important:
Toner should be kept out of reach of children. If toner is inhaled, swallowed or gets into contact with the eye, consult your doctor.
3 | 1 |
| |
| 2 |
How to Supply Toner:
1.To loosen the toner inside the cartridge, lightly tap the cartridge on a solid surface and shake it a few times. Remove the plastic cap from the cartridge.
2.Open the front door. Unlock and open the green lid.
18 | * Option |
