8. Other Basic Functions
8.3 Job List / Advance or Delete Jobs
In the Basic screen, press the JOB LIST key to call up this screen. It displays which copy and/or print jobs are waiting to be proces- sed and how long each individual job will need for completion.
The screen also gives information on the present system status (see below).
You can change the order, in which jobs are processed; and you can delete jobs before or while they are processed. Use the arrows to mark the job you want to bring forward or delete; then press the corresponding key.
If you press ADVANCE, the marked job will move up one position in the Job List. Press OK to leave the Job List screen.
Job List Screen
The displays in the Job List screen have the following meaning:
‘Mode‘ refers to the mode in which the system will process the job:
COPIER | = System works in copier mode | |
PRINTER | = | System works in printer mode |
SCANNER | = | System works in scanner mode |
‘Status‘ refers to the present status of the system. The following indications are displayed:
READY | = Ready to use in each mode | |
WAITING | = | Warming up |
PRINTING | = A copy or scan or print job is being | |
|
| processed |
INTERRUPT | = Present copy was interrupted for | |
|
| copying |
SCANNING | = Originals are scanned for copying | |
ERROR | = | Some problem occurred |
NO PAPER | = Paper of the required size is not | |
|
| available |
STOP | = The present job was interrupted | |
JAM | = | Paper jam occurs |
RESERVE | = The reserved job will be started | |
|
| immediately |
31
