NETGEAR XE102 manual Default Configuration Settings, HomePlug Light Not On, Ethernet Light is Off

XE102 Wall-Plugged Ethernet Bridge User Guide

HomePlug Light Not On

If the power light is on but the HomePlug light is not, check the following:

•Make sure that power is being provided to more than one PowerLine device. Another PowerLine device must be installed for successful communication across the PowerLine.

•Verify that the network password is the same on all devices in the PowerLine network.

Ethernet Light is Off

•Make sure that the Ethernet cable is plugged in properly to a router LAN port.

•On the attached Ethernet device or network adapter card, check that the Link light is on.

Default Configuration Settings

The following table shows default settings for the XE102 Wall-Plugged Ethernet Bridge.

Table 8. PowerLine Device Default Configuration Settings

Feature

Network

Description

Port Speed

Port Duplex

10/100 Mbps, Auto-negotiation

Auto-negotiation

Auto uplink

Administration

Device password

See product label.

PowerLine

Encryption password

HomePlug

12

v1.0, June 2007