NetComm NB712 Serial Console, Telnet, Baudrate 9600 Data Bits Parity Check Stop Bits Flow-control

14 Configuration via Serial Console or Telnet with Menu Driven Interface

14.1 Serial Console

Check the connectivity of the RS-232 cable from your computer to the serial port of ROUTER. Start your terminal access program with VT100 terminal emulation. Configure the serial link with the following value:

Parameter	Value
Baudrate	9600
Data Bits	8
Parity Check	No
Stop Bits	1
Flow-control	No

Press the SPACE key until the login screen appears. When you see the login screen, you can logon to Router.

Note: You have to use the SPACE key. Pressing other keys will not work.

User:admin

Password:*****

Note: The factory default user and passwords are both “admin”.

14.2 Telnet

Make sure the correct Ethernet cable is used to connect the LAN port of your computer to the Router. The LAN LNK indicator on the front panel will glow if the correct cable is used. Start your Telnet client with a VT100 terminal emulation and connect to the management IP of Router. When the login screen appears enter your User name and Password.

User:admin

Password:*****

Note: The default IP address is 192.168.1.1.

80	NB712 / NB714 User Guide
	YML829 Rev1