NetComm NB712 manual Bridge, After enter add menu, the screen will prompt as follow

14.16.4 Bridge

You can setup the bridge parameters in bridge command. If the product is configured as a router, you do not want to setup the bridge parameters. Move the cursor “ >> “ to bridge and press enter.

>> gateway	Default gateway
static	Static bridging table

You can setup default gateway IP via gateway command.

You can define 20 sets of static bridge in static command. After entering static menu, the screen will prompt as below:

>> add	Add static MAC entry
delete	Delete static MAC entry
modify	Modify static MAC entry
list	Show static bridging table

After enter add menu, the screen will prompt as follow

>>mac

lan_port wan1_port wan2_port wan3_port wan4_port wan5_port wan6_port wan7_port wan8_port list

Configure MAC address

Configure LAN interface bridging type Configure WAN1 interface bridging type Configure WAN2 interface bridging type Configure WAN3 interface bridging type Configure WAN4 interface bridging type Configure WAN5 interface bridging type Configure WAN6 interface bridging type Configure WAN7 interface bridging type Configure WAN8 interface bridging type Show static bridging table

98	NB712 / NB714 User Guide
	YML829 Rev1